| specking a new truck |
| 03-26-2017, (Subject: specking a new truck ) Post: #13 | |||
| |||
| RE: specking a new truck Chalk or paint which ever method you use, like the guy in the video says apply your marking then drive in a straight line then check. If you turn while testing the scrubbing could affect your results. For you 50/50 guys (loaded one way, empty one way) you'll have to decide which state is going to work best for you for your testing. I think I'd lean more to testing with a load on. User's Signature: Too young to quit........Too old to change. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
specking a new truck - arch_stanton - 03-26-2017, RE: specking a new truck - Brock - 03-26-2017, RE: specking a new truck - Hammerhead - 03-26-2017, RE: specking a new truck - arch_stanton - 03-26-2017, RE: specking a new truck - Brock - 03-26-2017, RE: specking a new truck - Brock - 03-26-2017, RE: specking a new truck - arch_stanton - 03-26-2017, RE: specking a new truck - Brock - 03-26-2017, RE: specking a new truck - Hammerhead - 03-26-2017, RE: specking a new truck - kryten - 03-26-2017, RE: specking a new truck - Brock - 03-26-2017, RE: specking a new truck - arch_stanton - 03-26-2017, RE: specking a new truck - kryten - 03-26-2017 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.