Vibratioin at 30psi and around 1300 rpm |
05-09-2017, (Subject: Vibratioin at 30psi and around 1300 rpm ) Post: #12 | |||
| |||
RE: Vibratioin at 30psi and around 1300 rpm [/quote] P.S. 30 psi boost @1300 rpm is lugging too low, drop a gear and keep it @ 16-1700. It will pull better, you'll drop your boost to 20 and get better mpg. Try it. [/quote] That's pretty much what I've been doing. As soon as I figure it out I'll update this....I'm going to replace that that carrier bearing and if that dont fix it, I'm going to put the HP and torque back to where it was. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Vibratioin at 30psi and around 1300 rpm - Trucker66 - 04-25-2017, RE: Vibratioin at 30psi and around 1300 rpm - Nilao - 04-25-2017, RE: Vibratioin at 30psi and around 1300 rpm - hhow55 - 04-25-2017, RE: Vibratioin at 30psi and around 1300 rpm - DKenworth - 04-25-2017, RE: Vibratioin at 30psi and around 1300 rpm - marek4792 - 04-25-2017, RE: Vibratioin at 30psi and around 1300 rpm - Trucker66 - 04-25-2017, RE: Vibratioin at 30psi and around 1300 rpm - Unilevers - 04-25-2017, RE: Vibratioin at 30psi and around 1300 rpm - Shotgun74 - 05-01-2017, RE: Vibratioin at 30psi and around 1300 rpm - Trucker66 - 05-09-2017, RE: Vibratioin at 30psi and around 1300 rpm - in2trux - 05-09-2017, RE: Vibratioin at 30psi and around 1300 rpm - Trucker66 - 05-09-2017 RE: Vibratioin at 30psi and around 1300 rpm - DKenworth - 05-09-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.