Hard shift high to low range
05-08-2017, (Subject: Hard shift high to low range ) 
Post: #7
RE: Hard shift high to low range
Hi lo spliter hanging up or lagging. Maybe time to change the valve.
Moisture could have corroded valve internals. Higher temps=tighter tolerances and it's not moving fast enough or sticking for a second or two. Just enough to throw synchronization.


User's Signature: 2010 386 Pete CM871, 13 spd. 3.55
replyreply
 Thanks given by: Rawze , hhow55 , Roysbigtoys , Mrkentee


Messages In This Thread
RE: Hard shift high to low range - in2trux - 05-08-2017
RE: Hard shift high to low range - Unilevers - 05-25-2017,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.