386 steering wheel revolutions

[JMBT]

You won't be able to tell if it's bad until you run it. The problem I have seen with remans is they usually leak around the output shaft dirt seal behind the pitman arm soon after they are put on. The same thing can happen if you grease that seal with a powered grease gun, so only grease it with a pump action grease gun and just enough to see a bit of grease around the output shaft. If reman is all they have, you gotta do what you gotta do. Just make sure you keep your receipt handy in case it starts to leak! Reman should still have a one year warranty. The Pete dealer should be able to tell from your VIN if you have a wide trac front axle, but if they pulled the P/N for the steering box from your VIN you should be good to go there.