cm2350 turbo
09-07-2017, (Subject: cm2350 turbo ) 
Post: #27
RE: cm2350 turbo
I got my truck into Mr Hag. What a great place!! He fixed my tune while his guys looked over the rest of the work that was done to my truck. They fixed a few things and changed out some sensors then he dropped a tune in and we went for a ride. I think he was a little nervous to drive my truck hard. So when I drove back I kinda kicked the crap out of the poor thing. I want to get the truck under a load before say anything about the tune itself or how the truck runs. I did get a new turbo and it is a stock replacement. It came with all the sensors and a new actuator. Mr Hag did say my turbo is weak but that he thought it was hanging up because of the way the vgt was tuned in my truck. Since the retune it hasnt hung up, but then again I only drove it a 1000 miles home empty. What I really liked about meeting him and getting my truck done there was he was able to show me the tuning and explain what he thought was going on. I thought it was a J ball tune, He didnt say but he hinted that he thought it was a custom tune. He didnt openly trash the guy that tuned my truck and give me a bunch of grief about wasting my money on bad tuning. I dont remember him saying anything really bad about the guy that tuned my truck. He just showed me what was wrong and explained why, then he fixed it. It was a great experiance. Thank you guys
replyreply


Messages In This Thread
cm2350 turbo - Felonygtp - 08-21-2017,
RE: cm2350 turbo - Rawze - 08-21-2017,
RE: cm2350 turbo - JMBT - 08-22-2017,
RE: cm2350 turbo - Felonygtp - 08-23-2017,
RE: cm2350 turbo - Rawze - 08-23-2017,
RE: cm2350 turbo - Felonygtp - 08-23-2017,
RE: cm2350 turbo - Rawze - 08-24-2017,
RE: cm2350 turbo - Starlight - 08-24-2017,
RE: cm2350 turbo - Felonygtp - 08-24-2017,
RE: cm2350 turbo - Waterloo - 08-24-2017,
RE: cm2350 turbo - Unilevers - 08-24-2017,
RE: cm2350 turbo - Hammerhead - 08-25-2017,
RE: cm2350 turbo - Rig Wrench - 08-26-2017,
RE: cm2350 turbo - Hammerhead - 08-25-2017,
RE: cm2350 turbo - Rig Wrench - 08-25-2017,
RE: cm2350 turbo - Unilevers - 08-25-2017,
RE: cm2350 turbo - Hammerhead - 08-26-2017,
RE: cm2350 turbo - Felonygtp - 08-28-2017,
RE: cm2350 turbo - Hammerhead - 08-28-2017,
RE: cm2350 turbo - Felonygtp - 08-29-2017,
RE: cm2350 turbo - Rawze - 08-29-2017,
RE: cm2350 turbo - AussieISX - 08-29-2017,
RE: cm2350 turbo - Felonygtp - 08-29-2017,
RE: cm2350 turbo - Rig Wrench - 08-29-2017,
RE: cm2350 turbo - Hammerhead - 08-30-2017,
RE: cm2350 turbo - Hammerhead - 09-03-2017,
RE: cm2350 turbo - Felonygtp - 09-07-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.