CM-871 Overhead...
10-21-2017, (Subject: CM-871 Overhead... ) 
Post: #6
RE: CM-871 Overhead...
Hammer, I just popped the top on this thing, and just poking around, I tried to get a .014 feeler between the intake arm and rocker, no way was that going in there, tried a few other thinner, down to .008 and could not get them in. And, both rockers are lose, so I now #1 clylinder is set properly. #6 has one lose rocker and one tight...

Is this normal? High School was the last time I messed with valves, and I cannot remember what I had for breakfast. Seriously. LOL!
replyreply


Messages In This Thread
CM-871 Overhead... - Waterloo - 10-20-2017,
RE: CM-871 Overhead... - Waterloo - 10-21-2017
RE: CM-871 Overhead... - Rawze - 10-22-2017,
RE: CM-871 Overhead... - JMBT - 10-22-2017,
RE: CM-871 Overhead... - Rawze - 10-22-2017,
RE: CM-871 Overhead... - Rawze - 01-16-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.