Help with insite vgt install

[Vulcantweet]

Watched Rawze’s video. Using insite 7.6.2.240. Went to onsite calibration - eco diagnostic tests - VGT actuator calibration. Went to Install option. New actuator connected but not installed on turbo. Hit “Start” and waited about 20 minutes. Nothing but blue line sweeping from left to right in progress box. Thought this was too long. Shut down and rebooted and started again. This time it’s been over 30 minutes and still nothing.
Rawze’s video made it seem like this first part was a 10 second deal - and I noticed his progress bar was green as opposed to blue.
Is this time normal? Any advice would be great - trying to get this installed tonight.

Thanks, Greg