Fly wheel housing gasket |
11-28-2017, (Subject: Fly wheel housing gasket ) Post: #2 | |||
| |||
RE: Fly wheel housing gasket Yes you will need to pull the transmission and remove oil pan. Support the engine remove motor mounts and starter. Remove clutch and flywheel. Then you are at the rear housing. Just remove the bolts and install new gasket. At this time I would do a clutch, and motor mounts. If you take it to a shop you are looking about $2,500 to $3,000 to do a complete job...With new clutch and motor mounts. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Fly wheel housing gasket - flonly - 11-28-2017, RE: Fly wheel housing gasket - Mr Hagg - 11-28-2017 RE: Fly wheel housing gasket - feltup - 11-28-2017, RE: Fly wheel housing gasket - Signature620 - 11-29-2017, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.