Oil Pressure Relief Valve/Regulator
12-07-2017, (Subject: Oil Pressure Relief Valve/Regulator ) 
Post: #5
RE: Oil Pressure Relief Valve/Regulator
I pulled the cotterpin and took the plunger and spring out. Then I placed 7 dimes in the tube being careful to ensure they were in the recess located at the base on the tube. Then reassembled it with a new cotter pin.

Not sure the procedure is the same on engines newer than my cm871.
replyreply


Messages In This Thread
RE: Oil Pressure Relief Valve/Regulator - Nilao - 12-07-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.