Insite cylinder cutout test

[Bulljammer]

So are you saying Rawze that this is not correct?

"cut out each injector and watch the rpm, a good injector will drop in rpm then rise above the normal rpm. a bad injector will not drop or rise the rpm. the screen shot below shows normal rpm befor the injector is disabled. the next screen shows the injector being disabled, the red arrow shows the rpm drop then the rpm will rise. this is a good working injector, a bad one will not drop rpm or have a rpm rise."

If it is not correct then why do five cylinders respond similarly and one doesn't? I trying to understand why the cylinders are responding the way they are and its frustrating that I can't shut off all but one cylinder on Insite!