heater core
04-28-2018, (Subject: heater core ) 
Post: #16
RE: heater core
If I was installing a shut off valve I would put it on the return hose. The reason being it will lose a little bit of pressure from having to travel more hose and through the heater core. Of course if the place you had to put the valve was in a bad spot I wouldn't hesitate to put it on the supply side. I can't see it losing much pressure if any from supply side to return side with the valve closed.
replyreply


Messages In This Thread
heater core - 74bassman - 02-01-2018,
RE: heater core - 74bassman - 02-01-2018,
RE: heater core - Waterloo - 02-03-2018,
RE: heater core - Rawze - 02-01-2018,
RE: heater core - Old Driver - 02-01-2018,
RE: heater core - Wiseman - 02-02-2018,
RE: heater core - Starlight - 02-02-2018,
RE: heater core - 74bassman - 02-02-2018,
RE: heater core - 74bassman - 02-02-2018,
RE: heater core - Wiseman - 02-02-2018,
RE: heater core - Nilao - 02-03-2018,
RE: heater core - Waterloo - 02-04-2018,
RE: heater core - 74bassman - 04-18-2018,
RE: heater core - Shandro - 04-28-2018
RE: heater core - Chamberpains - 04-28-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.