OIL/WATER TEMP
02-12-2018, (Subject: OIL/WATER TEMP ) 
Post: #1
OIL/WATER TEMP
Just had a cm870 long block put in. On really hard pulls oil temp reads 250 and water around 225/230. No turbo temp gauge. Rad recored. New cac. New water temp sensor. New tstat and oil cooler. Spoke to cummins shop mech and said if theres no codes or stop eng light. Its most like inaccurate gauges and shouldnt worry cuz if it was running at those temps codes or shut dwn should occur. Any info or opinions?
replyreply


Messages In This Thread
OIL/WATER TEMP - 808allstarr - 02-12-2018
RE: OIL/WATER TEMP - JMBT - 02-12-2018,
RE: OIL/WATER TEMP - Rawze - 02-12-2018,
RE: OIL/WATER TEMP - Rawze - 02-14-2018,
RE: OIL/WATER TEMP - Rawze - 02-15-2018,
RE: OIL/WATER TEMP - Rawze - 02-15-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.