Liner protrusion

Threaded Mode | Linear Mode

Liner protrusion

03-03-2018, (Subject: Liner protrusion )

Post: #14

Unilevers
Unregistered ( Likes)

Thanks:
Given thank(s) in post(s)

RE: Liner protrusion

(03-02-2018 )Joesixpack Wrote: Just thought I'd mention we used an IPD kit and the liner's are sitting 12.5 thou proud on the factory cut ledge. The Cummins liners came out at 9 thou.

Not worried in the slightest about it lasting.

it will last at 12.5 as long its not pushed hard. thats a decent number if they are not fretted.

Return to Top |

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Liner protrusion - Joesixpack - 02-21-2018,

RE: Liner protrusion - Unilevers - 02-21-2018,

RE: Liner protrusion - Wiseman - 02-23-2018,

RE: Liner protrusion - Nilao - 02-22-2018,

RE: Liner protrusion - Joesixpack - 02-23-2018,

RE: Liner protrusion - Signature620 - 02-22-2018,

RE: Liner protrusion - tree98 - 02-22-2018,

RE: Liner protrusion - Hammerhead - 02-23-2018,

RE: Liner protrusion - Signature620 - 02-23-2018,

RE: Liner protrusion - schISM - 02-23-2018,

RE: Liner protrusion - Rawze - 02-24-2018,

RE: Liner protrusion - Wiseman - 02-23-2018,

RE: Liner protrusion - Joesixpack - 03-02-2018,

RE: Liner protrusion - Unilevers - 03-03-2018

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.