Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Things that may help others... / POR 15

new reply
POR 15
03-12-2018, (Subject: POR 15 ) 
Post: #6
Contributing V.I.P.Chamberpains Offline
Contributing V.I.P.  (2773 Likes)  ****

 		Posts: 2,312
Joined: Jan 2018
Thanks: 1172
Given 2773 thank(s) in 1446 post(s)
RE: POR 15
Junk yards are stuffed full of complete sliding 5th wheel units that aren't as abused as that sounds. Then you can just rebuild and put new mount bushings in it and know its all good. Just make sure it's not off a rollover wreck. That usually twists the assembly beyond repair.
Return to Top | find
replyreply
 Thanks given by: aaronb
new reply


Messages In This Thread
POR 15 - Truck007 - 03-11-2018,
RE: POR 15 - Rawze - 03-11-2018,
RE: POR 15 - dhirocz - 03-11-2018,
RE: POR 15 - Chamberpains - 03-12-2018,
RE: POR 15 - dhirocz - 03-12-2018,
RE: POR 15 - Chamberpains - 03-12-2018
RE: POR 15 - Rawze - 03-12-2018,
RE: POR 15 - dhirocz - 03-12-2018,
RE: POR 15 - Rawze - 03-13-2018,
RE: POR 15 - Truck007 - 03-13-2018,
RE: POR 15 - Mrkentee - 03-29-2018,
RE: POR 15 - dhirocz - 03-30-2018,
RE: POR 15 - Mrkentee - 03-30-2018,
RE: POR 15 - stevesparts - 04-01-2018,
RE: POR 15 - Mrkentee - 04-01-2018,
RE: POR 15 - dhirocz - 04-01-2018,
RE: POR 15 - stevesparts - 04-02-2018,
RE: POR 15 - serv - 04-02-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication