Low boost, higher egt's |
04-06-2016, (Subject: Low boost, higher egt's ) Post: #10 | |||
| |||
RE: Low boost, higher egt's (04-05-2016 )simon999 Wrote: I was at cummins dealer today and they show me new turbo without actuator. I moved vg ring gear it moves same travel like mine turbo. So I guess that my turbo is good. But is diifferent design than in 'turbo inspection video' I have done dozens of CM871 turbo's and it ALWAYS goes to the half a hole position on all of them. I have seen a few that did not do this form new, and they were bad from new. On the newer CM2250 and 2350 engines, and their turbo's, I cannot tell you for sure yet. I have not had one apart yet, but i do know that The new turbo will also usually come with a plastic piece that will show you travel range. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Low boost, higher egt's - simon999 - 04-01-2016, RE: Low boost, higher egt's - Rawze - 04-01-2016, RE: Low boost, higher egt's - simon999 - 04-02-2016, RE: Low boost, higher egt's - Waterloo - 04-02-2016, RE: Low boost, higher egt's - Coco620 - 04-02-2016, RE: Low boost, higher egt's - simon999 - 04-04-2016, RE: Low boost, higher egt's - simon999 - 04-04-2016, RE: Low boost, higher egt's - simon999 - 04-05-2016, RE: Low boost, higher egt's - simon999 - 04-05-2016, RE: Low boost, higher egt's - Rawze - 04-06-2016 RE: Low boost, higher egt's - simon999 - 04-14-2016, RE: Low boost, higher egt's - Rawze - 04-14-2016, RE: Low boost, higher egt's - simon999 - 04-14-2016, RE: Low boost, higher egt's - simon999 - 04-14-2016, RE: Low boost, higher egt's - Rawze - 04-15-2016, RE: Low boost, higher egt's - ntadiesel - 04-15-2016, RE: Low boost, higher egt's - gearhead - 04-15-2016, RE: Low boost, higher egt's - simon999 - 04-15-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.