CM 870 hard start issue
03-31-2018, (Subject: CM 870 hard start issue ) 
Post: #21
RE: CM 870 hard start issue
(03-31-2018 )Evotrucker Wrote:  So I got the truck back and I got the notes the tech left.

I got a pdf file attached to it.

Fuel dampener is behind the fuel filter, it's in a really ugly spot.

From his diagnosis, it is can also be the gear pump. 37 psi is too low while cranking. Mine is well above 60 psi. He noted the damper was leaking too, so it could be either, but a leaky component is not good at all. You did not see the fuel leaking all over the place and things getting wet?????

Also you are using baldwin filters. NEVER EVER USE BALDWIN FILTERS IF YOU VALUE YOUR ENIGNE - ESPECIALLY THEIR OIL FILTERS!!!
reference: http://rawze.com/forums/showthread.php?t...3#pid22173
and...
http://rawze.com/forums/showthread.php?t...3#pid22163


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: hhow55


Messages In This Thread
RE: CM 870 hard start issue - Rawze - 03-31-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.