Blend door actuator
04-13-2018, (Subject: Blend door actuator ) 
Post: #2
RE: Blend door actuator
If it's like my '08 T660 (which I think all B cab KW's are) it is located behind the glove compartment. Remove the 4 screws to get the glove compartment out of the dash and it is on the right side of the duct work, you may have to remove the kick panel i'm not sure, that just pops off. I'll include a link to a PDF file I found that has TONS of info on KW A/C systems, look for page 99, it shows the mode control actuator location on the ductwork. Hope this helps!

https://www.macsw.org/WEB/images/MACS_Do...nowrth.pdf
replyreply
 Thanks given by: dhirocz , Skman , Chamberpains


Messages In This Thread
Blend door actuator - Skman - 04-13-2018,
RE: Blend door actuator - Matt - 04-13-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.