valve set
05-15-2018, (Subject: valve set ) 
Post: #9
RE: valve set
(05-15-2018 )lonestar16 Wrote:  can any one tell me the best way to get the little cove off were u need to put the tool to hand turn the motor at..mine looks painted in it seam hard as crap to get out...in here a hose coming out of the front of the valve cover that looks to have a little bit of soot build up any clue what that might be from.2350 cuming 285k on motor mandate..i wont to try n start running gear oil to see if that will help any whats the best gear oil to use getting oil change then dong the vale set this wkn...thanks

Look on Cummins Quickserve, log in, go to service, pick your manual for your motor, it will be listed, then go to Cylinder Head, the procedure to do everything, including how and where to bar the motor should be there. I have an 871, we remove the oil fill tube and insert a 3/4" ratchet extension into the front side of the air compressor. Turn clockwise with great big ratchet or breaker bar, the internal gears do the work. Markings are on the damper to get the correct positioning to adjust the valves.
replyreply
 Thanks given by: lonestar16


Messages In This Thread
valve set - lonestar16 - 05-13-2018,
RE: valve set - Chamberpains - 05-14-2018,
RE: valve set - lonestar16 - 05-14-2018,
RE: valve set - Chamberpains - 05-14-2018,
RE: valve set - Evotrucker - 05-14-2018,
RE: valve set - lonestar16 - 05-14-2018,
RE: valve set - lonestar16 - 05-15-2018,
RE: valve set - Waterloo - 05-15-2018
RE: valve set - Volvo8873 - 05-15-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.