| Common sensors that go bad |
| 07-18-2018, (Subject: Common sensors that go bad ) Post: #4 | |||
| |||
| RE: Common sensors that go bad Jorg81, the problem with keeping the sensors "on hand" is the cost involved with doing so. Most of the sensors run at least $100 for OEM, (don't buy the cheap knock offs), and NOX sensors run about $400 a piece!! Just do as Rawze says, clean them all at regular intervals and replace as needed! Your wallet will be a lot happier! Or fix the problem permanently and there will only be a few sensors you will even need to clean. User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!! | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Common sensors that go bad - Jorg81 - 07-17-2018, RE: Common sensors that go bad - Rawze - 07-17-2018, RE: Common sensors that go bad - DosGatos - 07-18-2018, RE: Common sensors that go bad - JMBT - 07-18-2018 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.