| Newly inframed engine with high oil pressure |
| 07-30-2018, (Subject: Newly inframed engine with high oil pressure ) Post: #2 | |||
| |||
| RE: Newly inframed engine with high oil pressure pull the sensor and put a hydraulic pressure gauge in its place then crank it up. You get high oil pressure then the dog-bone regulator in the oil pump is likely bad. hopefully it is not someone's f%kup during the reman. A clogged cross-channel somewhere can cause that too. 100+ psi can damage the oil cooler and possibly cause oil filter failure, putting debris into your new engine. My own truck runs 45 PSI and 49 cold but that is because I modified as per this mod... https://youtu.be/IHaDYh1DQUM User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Newly inframed engine with high oil pressure - Tamip - 07-30-2018, RE: Newly inframed engine with high oil pressure - Rawze - 07-30-2018 RE: Newly inframed engine with high oil pressure - Tamip - 07-30-2018, RE: Newly inframed engine with high oil pressure - pearce trucking - 07-30-2018, RE: Newly inframed engine with high oil pressure - Tamip - 07-30-2018, RE: Newly inframed engine with high oil pressure - Tamip - 07-31-2018, RE: Newly inframed engine with high oil pressure - Chamberpains - 07-31-2018, RE: Newly inframed engine with high oil pressure - Tamip - 07-31-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.