Newly inframed engine with high oil pressure
07-31-2018, (Subject: Newly inframed engine with high oil pressure ) 
Post: #8
RE: Newly inframed engine with high oil pressure
(07-31-2018 )Chamberpains Wrote:  Make sure you don't have a wiring issue 1st. Run the wires out for rubs or pinches or short to ground. Something may have got crushed or pinched during inframe process.

I've told them to check the wiring so hopefully they do first
replyreply


Messages In This Thread
RE: Newly inframed engine with high oil pressure - Tamip - 07-31-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.