CM570 compression in fuel
04-17-2016, (Subject: CM570 compression in fuel ) 
Post: #2
RE: CM570 compression in fuel
Things that come to mind...

* Bad Injectors.

* Leak in fuel lines (pressurize fuel tanks to 10 psi and see if it clears up).

* Cracked or worn out head.

* Bad fuel pump that is sucking air.

It is normal to get some bubbles into the return line. It is due to cavitation at the regulator. -- It will usually stop if you pressurize the fuel tanks a bit.

Have you boroscoped the engine while the injectors were out? -- Check for cracked valves, head, and signs of washed out cylinder walls or washed out carbon ring.

Also check temps at exhaust ports. that will usually reveal a lot too, and run the engine on only one cylinder at a time to see how it does.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: CM570 compression in fuel - Rawze - 04-17-2016
RE: CM570 compression in fuel - Unilevers - 04-17-2016,
RE: CM570 compression in fuel - Unilevers - 04-17-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.