Week end project
09-19-2018, (Subject: Week end project ) 
Post: #14
RE: Week end project
(09-19-2018 )Rawze Wrote:  
(09-19-2018 )lonestar16 Wrote:  
(09-19-2018 )Rawze Wrote:  
(09-19-2018 )lonestar16 Wrote:  I try not to idle as much as I can to try so I guess 35 is not to bad ..

The CM871 takes exactly 40 minutes if it is healthy. The newer engines are a bit different time span though I think.

I was hope after I did the work this wkn i could of gotten my insite hooked up on it so I could watch in see what was going on but that didnt happen so I'll have to do that soon I hope ..

Welcome to modern truck ownership. Learn to use a computer on your truck and its engine or go broke giving all your money away to those who will take full advantage of you because you can't.

That's what I'm trying to do learn everything I can ..just got insight so I'll be trying to do what i can that's for sure
replyreply
 Thanks given by: Rawze , Chamberpains , gatow900


Messages In This Thread
Week end project - lonestar16 - 09-13-2018,
RE: Week end project - Nilao - 09-14-2018,
RE: Week end project - MCRENT - 09-16-2018,
RE: Week end project - Nilao - 09-19-2018,
RE: Week end project - Rawze - 09-19-2018,
RE: Week end project - Rawze - 09-19-2018,
RE: Week end project - lonestar16 - 09-19-2018
RE: Week end project - Rawze - 09-20-2018,
RE: Week end project - Rawze - 11-03-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.