| Insite HP upgrades |
| 10-08-2018, (Subject: Insite HP upgrades ) Post: #6 | |||
| |||
RE: Insite HP upgrades (10-08-2018 )Steen Wrote: I have 3.36 with isx 425hp 10 speed trans. I want to go to 3.58 or 3.73. Whats the process of that switch? Only mechanical or also something needs to be done with the ecm If your looking at factory compatible programs with different HP settings, they are listed here... http://rawze.com/forums/showthread.php?tid=1&pid=1#pid1 To answer your question -- When someone changes rears out to different ratio, a person needs to use Insite to adjust it in the engine computer so that the engine can report the correct speed. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Insite HP upgrades - fatbedsv77 - 09-23-2018, RE: Insite HP upgrades - smorgan87 - 09-23-2018, RE: Insite HP upgrades - Rawze - 09-24-2018, RE: Insite HP upgrades - Hammerhead - 09-24-2018, RE: Insite HP upgrades - Steen - 10-08-2018, RE: Insite HP upgrades - Rawze - 10-08-2018 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.