ISX 870 vibration
10-07-2018, (Subject: ISX 870 vibration ) 
Post: #1
ISX 870 vibration
So I have been chasing a pretty bad vibration with my service truck for two week's, I changed every mount looked this thing top to bottom and couldn't figure it out, only did it under a load weather hard or easy load, so i decided to start looking at the calibration( I bought this truck this way) And that's when i found it, The truck was factory 8520 CPL which is what i inframed it to, after looking someone had put a 565@1850 Torque 8518 CPL in this thing,No wonder it was so violent during acceleration. So i used Calterm and put in the proper CPL 450@ 1650 Torque and guess what? The vibration is gone and this thing is so much smoother. Goes to show, Look closely at what your Buying( lesson learned)
replyreply
 Thanks given by: Rawze , Chamberpains , Zapah


Messages In This Thread
ISX 870 vibration - oldgms - 10-07-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.