| CM 871 help please |
| 12-28-2018, (Subject: CM 871 help please ) Post: #10 | |||
| |||
RE: CM 871 help please (12-26-2018 )Ryeguy475 Wrote: ... It has a vibration under load that I just cannot seem to solve Is the truck is de-mandated (deleted) ? if so, by who? Bad programming is notorious for making the same kinds of internal engine vibrations, usually roughly in the 1350 - 1500 rpm range too. A slipped injection cam after the inframe can do this too. A lot of things can go wrong with an ISX inframe, and most shops set themselves up for doing the job half-arssed at best. Just read through the Waterloo inframe adventure that I ended up helping him straighten out... What a nightmere that was. It reads like a nightmere novel saga... http://rawze.com/forums/showthread.php?t...6#pid25356 User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
CM 871 help please - Ryeguy475 - 12-26-2018, RE: CM 871 help please - marek4792 - 12-26-2018, RE: CM 871 help please - Roysbigtoys - 12-27-2018, RE: CM 871 help please - shoe128 - 01-01-2019, RE: CM 871 help please - Ryeguy475 - 12-27-2018, RE: CM 871 help please - Ryeguy475 - 12-27-2018, RE: CM 871 help please - Rockhwy - 12-27-2018, RE: CM 871 help please - Ryeguy475 - 12-27-2018, RE: CM 871 help please - Waterloo - 12-27-2018, RE: CM 871 help please - slowpoke - 12-27-2018, RE: CM 871 help please - Mrkentee - 12-28-2018, RE: CM 871 help please - Rawze - 12-28-2018 RE: CM 871 help please - Ryeguy475 - 12-28-2018, RE: CM 871 help please - Rawze - 12-28-2018, RE: CM 871 help please - Ryeguy475 - 12-28-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.