Droping the transmission
05-04-2016, (Subject: Droping the transmission ) 
Post: #11
RE: Droping the transmission
That jack is too narrow in my book and may not lift high enough if you have the truck on blocks or jack stands. A good truck trans jack will be much wider and the plate should be about 12x18 inches.

Rawze is right about the Chinese metal. I would be afraid of it buckling under stress.

You might search Craigslist for a good used one for the same price.
I'm all for DIY but only if I can do it safely and don't have to do it twice.


User's Signature: 2010 386 Pete CM871, 13 spd. 3.55
replyreply


Messages In This Thread
RE: Droping the transmission - in2trux - 05-04-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.