Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Bent rear axle?

new reply
Bent rear axle?
12-30-2018, (Subject: Bent rear axle? ) 
Post: #19
Contributing Memberimalumberjack Offline
Contributing Member  (135 Likes)  ****

 		Posts: 264
Joined: Feb 2018
Thanks: 240
Given 135 thank(s) in 92 post(s)
RE: Bent rear axle?
How bout this ... I reinstall hub, tighten bearings to spec .. if its bent flange on axle I should be able to see a gap when I slide it up against hub?
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Bent rear axle? - tree98 - 12-29-2018,
RE: Bent rear axle? - Waterloo - 12-29-2018,
RE: Bent rear axle? - Waterloo - 12-29-2018,
RE: Bent rear axle? - Rawze - 12-29-2018,
RE: Bent rear axle? - Rawze - 12-29-2018,
RE: Bent rear axle? - Rockhwy - 12-29-2018,
RE: Bent rear axle? - tree98 - 12-30-2018,
RE: Bent rear axle? - imalumberjack - 12-30-2018
RE: Bent rear axle? - Nilao - 12-31-2018,
RE: Bent rear axle? - Rawze - 01-02-2019,
RE: Bent rear axle? - Rawze - 01-03-2019,
RE: Bent rear axle? - Nilao - 01-02-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication