2250 pump failure.....and the result.
05-04-2016, (Subject: 2250 pump failure.....and the result. ) 
Post: #1
2250 pump failure.....and the result.
This guy was not able to start his truck.....which was a good thing. I told him to check the fuel pressure upon cranking and it was 70psi. I advised him to check the specs because I thought that was low. He did and pulled the pump....guess what? He is now asking if there is a rebuild kit out there and I advised him to go completely over the engine and flush the oil out. Prolly pull the pan and check the rods and mains too. This guy may have dodged a bullet but if you have any thoughts let me know and I will pass it on. I dont believe he had the recall filter on the pump.


Attached File(s)Image(s)
./uploads/201605/post_1845_1462406634_1fb9404144d96340b25b874840a028f5.jpg./uploads/201605/post_1845_1462406622_c3b704d2b65342e61488ceb9b465fa73.jpg./uploads/201605/post_1845_1462406592_c0d9c451ae16059abd01b973792ce768.jpg./uploads/201605/post_1845_1462406611_d8cc7289a36c799e0100e1bf380e80f3.jpg./uploads/201605/post_1845_1462406579_d6dbbb18c4c44484c6a74957d9c8d3ff.jpg
replyreply


Messages In This Thread
2250 pump failure.....and the result. - preacherboy24 - 05-04-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.