Turbo Table Settings

[schISM]

(02-03-2019 )ynot Wrote:  If your super adventurous you can even ditch those tables an turn em off an control the vgt using the mcf, but that's a different discussion for another time lol

That’s what I ended up using in my 2350 cal. With the egr ref. tables zeroed out and the MCF tables tweaked at the very bottom in the idle range I was able to get just what I wanted. The 2350 has a command to reference FAF when the egr valve is closed and that did the trick to get boost to a minimum but still adjust for ambient temps. It maxed out at 32-33 psi on hot days but pulled back to 26-27 when it got cold out. It always kept the egts right in the 700-800 range.