Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Adjusting clutch

new reply
Adjusting clutch
02-17-2019, (Subject: Adjusting clutch ) 
Post: #9
Contributing MemberDVT873 Offline
Contributing Member  (288 Likes)  ****

 		Posts: 325
Joined: Sep 2018
Thanks: 82
Given 288 thank(s) in 165 post(s)
RE: Adjusting clutch
(02-11-2019 )Unilevers Wrote:  the bolt turns a big adjusting ring in the clutch. if you go too far one way it will unthread the ring off the clutch and you will effectively destroy it. dont turn it all the way one way it will be ruined if you havent already. This is for a eaton easypedal setup which is im assuming you have.

you cannot restart the adjustment ring once it unthreads itself, thus no more adjusting for you!

there is a nice diagram where you can see how the clutch works here

http://www.dwclutch.com/D&W/D&W%20Clutch...df?opwvc=1

Very nice attachment. Thanks
Return to Top | find
replyreply
new reply


Messages In This Thread
Adjusting clutch - tree98 - 02-11-2019,
RE: Adjusting clutch - tree98 - 02-11-2019,
RE: Adjusting clutch - Nilao - 02-11-2019,
RE: Adjusting clutch - tree98 - 02-11-2019,
RE: Adjusting clutch - Unilevers - 02-11-2019,
RE: Adjusting clutch - DVT873 - 02-17-2019
RE: Adjusting clutch - tree98 - 02-12-2019,
RE: Adjusting clutch - Unilevers - 02-12-2019,
RE: Adjusting clutch - Rawze - 02-18-2019,
RE: Adjusting clutch - tree98 - 02-17-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication