Forced regen face plug question |
03-10-2019, (Subject: Forced regen face plug question ) Post: #3 | |||
| |||
RE: Forced regen face plug question cleared the faceplug fault. did the regen and dpf differential after was 0.0 with key on engine not running with idling pressure of 0.2 after the cook. Not sure where the 0.12 was coming from earlier. history is typical; between 2 and 13 hours between rolling regens. depends on load weight and speed. the maximum pressures during rolling regens may be while pulling a hill. the parked regen looks better but was only 1100 rpm no load. satisfied considering the miles and hours; a little over 20k hrs run time. Was a mega fleet truck with company drivers. User's Signature: 2011 Prostar Cummins 871 | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Forced regen face plug question - DosGatos - 03-10-2019, RE: Forced regen face plug question - hhow55 - 03-10-2019, RE: Forced regen face plug question - DosGatos - 03-10-2019 RE: Forced regen face plug question - Rawze - 03-11-2019, RE: Forced regen face plug question - DosGatos - 03-11-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.