Base timing help |
03-22-2019, (Subject: Base timing help ) Post: #11 | |||
| |||
RE: Base timing help Well got the timing down she was running smoothly for about 25 minutes. Then started knocking. Turned her off. Tried to bar over and can only get about 7/8 of a full turn. Barred backwards to repin crank and check timing. It did not slip she still in time. Pull rockers all values move and measure the same. Pulled injectors put camera in couldn't see any thing wrong but #6 had scared liner pulling head to see what's going on. Anyone have any information?? | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Base timing help - Swaid25 - 03-19-2019, RE: Base timing help - Swaid25 - 03-19-2019, RE: Base timing help - hhow55 - 03-19-2019, RE: Base timing help - tree98 - 03-19-2019, RE: Base timing help - Swaid25 - 03-19-2019, RE: Base timing help - Unilevers - 03-19-2019, RE: Base timing help - Swaid25 - 03-20-2019, RE: Base timing help - Evotrucker - 03-19-2019, RE: Base timing help - Swaid25 - 03-20-2019, RE: Base timing help - Rawze - 03-20-2019, RE: Base timing help - Swaid25 - 03-22-2019 RE: Base timing help - Rawze - 03-22-2019, RE: Base timing help - Swaid25 - 03-23-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.