Program questions

[Lonestar10]

just checked its set to Automotive. and CPL was 3749 i think that crossrefs back to a 2733 before DPF updates.


so you are right i believe on turbo have to wait till daylight to read part numbers. and i have brought down my idle percents a bunch from the overlay to get the airflow down as it could float a stack of papers. 34%ish was at 59% from the overlay. still some air coming out but not near as much.

But on my top end im around 60% closed to get up to 38-39PSI range, think overlay was something like 52% and was only hitting 32PSI on a long hill.