New code problem...help?
05-23-2019, (Subject: New code problem...help? ) 
Post: #1
New code problem...help?
Hi all. I'm having a code pop up that I can't pinpoint. I bought this truck about 1.5 years ago.
2013 Kenworth w900 isx15...de-mandated few years ago. New turbo at that time. About 9 months after I bought it...I had to do a rebuild. Did out of frame full rebuild because of structure leaks. Replaced all injectors, CAC, rad, did update to fuel pump, and more. Truck has run pretty great since then (about 200,000KM). Pulling B train oil tankers.
Here's my new problem.
Getting a Check Engine light and code on the Road Relay screen. It happens when on an incline under load and when I level off...it goes away.
The pyro will go up to 1100...turbo maxes at 30psi and I get this code:
* PID 157 ENGINE CONTROLLER INJ METERING RAIL PRESSURE RESERVED
I changed fuel/water filter and engine fuel filter. Also I changed the exhaust gas pressure sensor because that had thrown a code a few times before this code ever started. Once this new code showed up...the gas sensor code stopped but I changed it hoping that was the culprit. But no luck
Anybody ever see this issue??
replyreply


Messages In This Thread
New code problem...help? - Skman - 05-23-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.