Timing

[Waterloo]

(06-20-2019 )Lonestar10 Wrote:  no i mean i checked quickserve then looked at part numbers on invoice and all match ;p so unless they were billing the previous owns for the wrong items it should be ok.

In my case, they put the part numbers on the invoice for the parts they put in, the 2250/2350 parts in my CM-871... That does not mean they installed things properly, my front end gear train was ready to blow apart, the one cam gear, the scissor gear, only had a few more miles on her before she blew apart. No Loc-Tite, from the looks of things, was used on the cam gear assembly. Gears had jumped some teeth. Very sloppy. And it is very clear in Quickserve on the proper way to install these cam gears using Loc-Tite 609.