| ISB in limp mode/No Codes |
| 06-26-2019, (Subject: ISB in limp mode/No Codes ) Post: #2 | |||
| |||
RE: ISB in limp mode/No Codes (06-26-2019 )mayhem1 Wrote: ... you should never do this unless you have pulled the DOC and DPF and had them professionally baked, de-ashed, and flow-tested. - Doing so throws the entire system off and makes it worse. your next move it to remove them and actually have it done... THEN do a proper reset. Also have the SCR can flow tested or inspected for restriction,. and do an thorough EGR tune-up, fix all problems that may be making it produce too much soot, fix any problems that lower fuel mileage, etc. + change oil at short intervals to de-soot the engine. -- Sounds like you have one seriously neglected truck on your hands there. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
ISB in limp mode/No Codes - mayhem1 - 06-26-2019, RE: ISB in limp mode/No Codes - Rawze - 06-26-2019 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.