Midbed Ammonia Sensor
08-30-2019, (Subject: Midbed Ammonia Sensor ) 
Post: #10
RE: Midbed Ammonia Sensor
(08-30-2019 )Rawze Wrote:  
(08-29-2019 )kozakvod Wrote:  Guy what is your problem? I posed a question about a Midbed Ammonia Sensor and you’re setting here telling me Im broke and how you’re going to take my loads from me? Hopefully your night gets better than it’s been.

(the beer is still talkin'...)

My point is that your posts have implied that you have been caught in that cycle of false hope that too many people rely on these days. Relying on warranty while most go broke waiting for that free OE sh#it-quality repair that will only be done half-arssed at best.

Your last post implies you have started to realize this, and are now trying to break away a bit get on top of things (cheers to this, btw). That is a great step forward, so my last post was simply a sarcasm of your previous actions. However, you say your going to continue to rely on that warranty that might just well break you in the mean time (you mentioned something "November of 2020")?.

The irony of what you posted is very typical of people who come on here, afraid to take matters into their own hands, afraid of that all-mighty piece of paper or promise that will only land them with grief IF THEIR ENGINE DID FAIL because it is worthless!. You think that warranty company is going to pay to have that engine re-bult the right way, then you got some serious drugs your smokin there. They will only pay for about a half arsse garbage minimum s$it-show job at best,... and dictate where you go (some OE shi#t$hole!) and you will get a half-arssed garbage inframe not worth 2 cents in my book. -- i got one better... how about you call them up and ask them if you did the work yourself, how much of the internals and inframe parts they would pay for ....

you will get silence and an excuse... and more silence...

-- THROW THE THOUGHT OF A WARRANTY IN THE TRASH AT THIS POINT!!!! --- DO WHAT IS NECESSARY TO FIX WHAT YOU GOT ONE WAY OR ANOTHER AND DON'T LOOK BACK!!! - The money you save will be that revenue I was talking about for how easily I could use and cut your customers out from under you with.

In other words,.. if you can't compete with bottom dollar profiteers like me, then you are only likely to to hate your situation by the end of next year. We are headed for a recession this next year ... like it or not... fuel prices are highly likely to rise along with it ... ADD TO THAT, the full-autonomous trucks that the mega-fleeces are gearing up to steal freight with, means that everyone in our industry is going to bite into that s#it sandwich,.. What are you going to do about it so that guys just like me don't come along and steal your customers from you while you are sitting half the time repeating history because your afraid to "void that worthless piece of paper".

Hopefully this clarifies things for everyone, ... We can only watch and see what the future brings.

Rawze you missed the point of everything I said, but that's fine, I'm not gonna beat a dead horse regarding that point.

I get EVERYTHING you're saying and believe it or not, completely respect your words. Regarding that warranty, I'm not going to abandon it to the point of it being completely useless. Contrary to what you may think, it has paid for itself a few times over so it hasn't been all bad. However, that isn't to say that it's all good either because it's not. However, if a MAJOR ticket item should show itself before its end, I won't hesitate to access it.

You're right though, I should have had Insite a long time ago, I didn't and I take full responsibility for the money I've spent by not having it, but I have it now. Fixing yesterday is pointless venture.

So yes, I'm taking on the responsibility of my truck. Sorry that doesn't seem apparent to you, but it doesn't need to be either. I simply asked a question and then a follow up question, that was it. Was never meant to drop into this type of a conversation.

Enjoy your beer and have a good night.
replyreply


Messages In This Thread
RE: Midbed Ammonia Sensor - kozakvod - 08-30-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.