Possible head/valve problem

[Waterloo]

Only way to properly repair is to in frame, purchase new head and if nothing has cut lose, you may be able to re use the liners and properly cut the block. But, having been through this myself, when you actually get inside the motor, you may just have to order the entire kit and replace everything, especially the lower end. Odds are, this motor was just thrown together and dry started, just like mine... $38,000

I went to GA, and rebuilt mine the second time in Rawze's driveway. We got it apart, and it was ugly, they installed all of the wrong parts, skipped many steps, etc. 50,000 or so miles, the motor would have destroyed itself, the block would have been destroyed if what we found had cut loose.