Load Based Speed Control Issue
10-20-2019, (Subject: Load Based Speed Control Issue ) 
Post: #14
RE: Load Based Speed Control Issue
* max mechanical rpm limit for the ISX is 2700.
* Max safe rpm to hold for extended periods is 2400, and is their publicly listed max rpm.
* Factory will often set them governed to 2100 for safety.
* The engine has its highest longevity at 1650 or thereabouts when pushing 100% engine load.
* Anything much above 50% or so engine load below about 1500 rpm takes its toll rapidly on the engine.

* Driving it only 1100 - 1500 rpm(Where the mega-fleets set them and gear them wrong) its whole existence can shorten its life by as much as 50%, as this is only the bottom 1/3 of the engines working range.


- It is not unusual for us to run at 1500 - 1800+ rpm, a gear or 2 down from top gear for 10+ hours at a time when loaded to 80,000 lbs and running in terrain like the Pennsylvania hill country.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: SquareOne , Waterloo , Chamberpains , mechanic3698 , JimT


Messages In This Thread
RE: Load Based Speed Control Issue - Unilevers - 10-19-2019,
RE: Load Based Speed Control Issue - Unilevers - 10-20-2019,
RE: Load Based Speed Control Issue - Rawze - 10-20-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.