870 broken exhaust manifold bolt
11-06-2019, (Subject: 870 broken exhaust manifold bolt ) 
Post: #19
RE: 870 broken exhaust manifold bolt
(11-06-2019 )tree98 Wrote:  I would have bought it if I snapped off a bunch of the bolts. Since I had just one to get out I decided against it. Truth be told I wish I would have just bought it. Good tools are expensive, that's just the reality.

Agreed.
Is Snap On for everyone? (Just an example)
No, but then again a buddy was in the middle of a brake job and broke a cheap 21 mm socket. My first question was who only owns one 21 mm socket
But then again I’ve witnessed a welded up 1-1/8” socket being used on axle flange nuts


User's Signature: I have no idea what I’m doing and probably need supervising
replyreply
 Thanks given by: tree98


Messages In This Thread
RE: 870 broken exhaust manifold bolt - DDlighttruck - 11-06-2019
RE: 870 broken exhaust manifold bolt - Unilevers - 11-05-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.