Pressure testing CM870 |
11-03-2019, (Subject: Pressure testing CM870 ) Post: #10 | |||
| |||
RE: Pressure testing CM870 Now you just need to fashion something to block off the 6" intake pipe on the turbo. Then all you have to do to pressurize the whole system, including the CAC, is remove the turbo intake temp sensor and hook your pressure regulator in. Then pump in on up. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.