Pressure testing CM870 |
11-03-2019, (Subject: Pressure testing CM870 ) Post: #13 | |||
| |||
RE: Pressure testing CM870 I built all my tester out of pvc figured if the glues good for 60-90 psi water good enough for 20-30 of air. Just drilled/tapped the caps for pressure regulator then put a washer and retaining nut on inside of pipe on regulator then glued and clamped boots on them User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.