Pressure testing CM870
11-04-2019, (Subject: Pressure testing CM870 ) 
Post: #16
RE: Pressure testing CM870
(11-03-2019 )Chamberpains Wrote:  Now you just need to fashion something to block off the 6" intake pipe on the turbo. Then all you have to do to pressurize the whole system, including the CAC, is remove the turbo intake temp sensor and hook your pressure regulator in. Then pump in on up.

      

Just so I’m following along....which I think I am....

Block off the turbo air intake 6”....yup, that makes sense

Remove turbo intake sensor....that’s gotta be the one circled?


User's Signature: I have no idea what I’m doing and probably need supervising
replyreply


Messages In This Thread
RE: Pressure testing CM870 - DDlighttruck - 11-04-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.