Pressure testing CM870

new reply

Threaded Mode | Linear Mode

Pressure testing CM870

11-04-2019, (Subject: Pressure testing CM870 )

Post: #19

Chamberpains Offline

Contributing V.I.P. (2773 Likes)

Posts: 2,312
Joined: Jan 2018

Thanks: 1172
Given 2773 thank(s) in 1446 post(s)

RE: Pressure testing CM870

You got it DDlight. Just make sure your rigging into the 6" intake is right at the turbo. That big rubber intake hose will not hold pressure. You'll probably blow that apart if you try.

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Pressure testing CM870 - DDlighttruck - 11-02-2019,

RE: Pressure testing CM870 - Mattman - 11-02-2019,

RE: Pressure testing CM870 - DDlighttruck - 11-02-2019,

RE: Pressure testing CM870 - tree98 - 11-03-2019,

RE: Pressure testing CM870 - DDlighttruck - 11-03-2019,

RE: Pressure testing CM870 - Waterloo - 11-03-2019,

RE: Pressure testing CM870 - DDlighttruck - 11-04-2019,

RE: Pressure testing CM870 - Waterloo - 11-03-2019,

RE: Pressure testing CM870 - tree98 - 11-03-2019,

RE: Pressure testing CM870 - Waterloo - 11-03-2019,

RE: Pressure testing CM870 - tree98 - 11-03-2019,

RE: Pressure testing CM870 - Chamberpains - 11-03-2019,

RE: Pressure testing CM870 - DDlighttruck - 11-04-2019,

RE: Pressure testing CM870 - tree98 - 11-03-2019,

RE: Pressure testing CM870 - Lonestar10 - 11-03-2019,

RE: Pressure testing CM870 - Rawze - 11-03-2019,

RE: Pressure testing CM870 - Hammerhead - 11-04-2019,

RE: Pressure testing CM870 - Lonestar10 - 11-04-2019,

RE: Pressure testing CM870 - Chamberpains - 11-04-2019

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.