Overshot's Blog

[overshot]

Mr. Hagg got himself a new tool. So we replaced my valve seals. Exhaust valves were leaking. Poor design and the heat got'em. We installed the updated valve seals. Valve guides felt good. I think Mr. Hagg is gonna post some pics.

Pulled the head off of the fuel pump. And low and behold it had ceramic plungers. Waiting for parts to update the pump.

Rolled new rod and mains in. New oil pump and shimmed it. Bearings were not too bad. But were showing some wear.

New thermostats oil & water.

New air dryer.

And last but not least new cab shocks.

Oh and I got a new seat.