Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / YTS Turbo

new reply
YTS Turbo
12-27-2019, (Subject: YTS Turbo ) 
Post: #1
Contributing MemberPd6cas2 Offline
I know just Enough to get Me in trouble.  (144 Likes)  ****

 		Posts: 178
Joined: Jan 2016
Thanks: 643
Given 144 thank(s) in 85 post(s)
YTS Turbo
02 ISX CM570
I install new turbo over the holiday,also installed new downpipe ‘inlet and outlet oil lines into turbo!
The problem I see is oil coming out my downpipe by clamp!
I just drove it 25 miles to load up ‘leave early tomorrow!
Question is ‘ Do new turbos-normally pass oil during break-in
Holset HX55 from YTS Griffin, Ga .
Return to Top | find
replyreply
new reply


Messages In This Thread
YTS Turbo - Pd6cas2 - 12-27-2019
RE: YTS Turbo - Pd6cas2 - 12-27-2019,
RE: YTS Turbo - Pd6cas2 - 12-27-2019,
RE: YTS Turbo - Magard - 12-27-2019,
RE: YTS Turbo - Pd6cas2 - 12-27-2019,
RE: YTS Turbo - Magard - 12-27-2019,
RE: YTS Turbo - Rawze - 12-28-2019,
RE: YTS Turbo - Signature620 - 12-28-2019,
RE: YTS Turbo - Pd6cas2 - 12-28-2019,
RE: YTS Turbo - Mr Hagg - 12-28-2019,
RE: YTS Turbo - Pd6cas2 - 12-28-2019,
RE: YTS Turbo - Mattman - 12-28-2019,
RE: YTS Turbo - Rawze - 12-29-2019,
RE: YTS Turbo - Waterloo - 12-29-2019,
RE: YTS Turbo - Nostalgic - 12-29-2019,
RE: YTS Turbo - Waterloo - 12-29-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication