Isx wont start
01-05-2020, (Subject: Isx wont start ) 
Post: #13
RE: Isx wont start
Pulled pump head... all looked pretty normal. No scoring no abnormal wear, no metal. It does have the updated steel not ceramic.

The only thing i didnt like was quickserve says blow shop air, watch both plungers come up. Passed. Then it says to remove springs and push plunger down with a finger a few times and if it comes back up then it passes. Did a few times and noticed. The more you do it the more one plunger doesnt come back up. One always goes back to it's up posistion the other gets lower and lower everytime you do it. Could it be a bad seal?
replyreply


Messages In This Thread
Isx wont start - Toddmsc - 01-04-2020,
RE: Isx wont start - Rawze - 01-04-2020,
RE: Isx wont start - Toddmsc - 01-04-2020,
RE: Isx wont start - Rawze - 01-05-2020,
RE: Isx wont start - Unilevers - 01-05-2020,
RE: Isx wont start - Toddmsc - 01-05-2020,
RE: Isx wont start - tree98 - 01-05-2020,
RE: Isx wont start - Toddmsc - 01-05-2020,
RE: Isx wont start - Rawze - 01-06-2020,
RE: Isx wont start - Waterloo - 01-05-2020,
RE: Isx wont start - tree98 - 01-05-2020,
RE: Isx wont start - Toddmsc - 01-05-2020,
RE: Isx wont start - Toddmsc - 01-05-2020
RE: Isx wont start - Rawze - 01-06-2020,
RE: Isx wont start - Mr Hagg - 01-06-2020,
RE: Isx wont start - Toddmsc - 01-06-2020,
RE: Isx wont start - Rawze - 01-06-2020,
RE: Isx wont start - Toddmsc - 01-07-2020,
RE: Isx wont start - Waterloo - 01-07-2020,
RE: Isx wont start - Toddmsc - 01-07-2020,
RE: Isx wont start - Rawze - 01-07-2020,
RE: Isx wont start - Rawze - 01-07-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.