Exhaust back pressure sensor plug end
01-23-2020, (Subject: Exhaust back pressure sensor plug end ) 
Post: #8
RE: Exhaust back pressure sensor plug end
(01-23-2020 )Chamberpains Wrote:  Excellent, thanks Rawze.

Is there a local place that carries a wide variety of those connectors? Napa or a place like that? Or are they an order type piece?

Also looking at the quickserve post I found they list the manufacturer and plug. Framatome I believe is the gold plated version of the Delphi connector. Then they list Apex 2.8. That brought up a locking version of the plug I'm dealing with.


Delphi makes the same plugs and connectors. Just slightly different. I noticed Framatome sites were referencing aircraft connectors a lot. Maybe that's the go to for that application.

Learning what and who makes these damned electrical connectors is a game changer for getting away from dealing with the stealershits and rip off side of OEM. Much like learning about those VOSS push in fuel fittings. Great information.

My International dealer stocks those metal crimp on connectors. A little pricey, but they work.
replyreply
 Thanks given by: Chamberpains


Messages In This Thread
RE: Exhaust back pressure sensor plug end - Waterloo - 01-23-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.