Reprogram issue :/
02-05-2020, (Subject: Reprogram issue :/ ) 
Post: #10
RE: Reprogram issue :/
(01-30-2020 )Rawze Wrote:  First thing I always do when someone comes over here is make a pdf document printout of the entire 'Features and parameters' settings that are showing in insite before making any kind of changes. Seen this happen too many times.

- as a last resort, you can pull the ecm off the truck, take it to the stealers%it and have them re-flash the ecm with the latest calibration and restore the original settings for your truck. - Usually costs a few hundred bucks.

I tried to do this, where can i find instructions on the procedure i have a file i would like you to look at.
Thanks
replyreply


Messages In This Thread
Reprogram issue :/ - FueledUp - 01-28-2020,
RE: Reprogram issue :/ - Unilevers - 01-28-2020,
RE: Reprogram issue :/ - Rawze - 01-30-2020,
RE: Reprogram issue :/ - 2dlb - 02-05-2020
RE: Reprogram issue :/ - Rawze - 02-05-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.